M

Matt Millman

mattmillman.com · Personal blog · on HN since 2021

Matt Millman writes about electronics hobby projects, connector types and crimping, vintage networking, and PC hardware quirks like PCIe bifurcation.

What HN saysCommenters call his connector pages one of the best resources available, citing the JST and DuPont guides, which also warn against crimping DuPont connectors as a hobbyist.
20HN people shared it
8linked it in comments
14stories submitted
420story points
7 months agolast shared
2021people per year2026

Most-shared posts

  1. 1
  2. 2
    Building a 10BASE5 Thick Ethernet Network (2012)
    4 people · 42 points · first shared 2023 · 14 comments on HN
  3. 3
    Matt's Page of Connectors and Crimping
    3 people · 9 points · first shared 2023 · 1 comments on HN
  4. 4
    Why Do We Call These “DuPont” Connectors?
    2 people · 94 points · first shared 2021 · 81 comments on HN
  5. 5
  6. 6
    I Don’t ‘Do’ Arduino
    1 people · 31 points · first shared 2021 · 27 comments on HN
  7. 7
    Rolling your own PCIe 3.0 Bifurcation riser (2021)
    1 people · 2 points · first shared 2024 · discussion on HN
  8. 8
  9. 9
    An Intel MCS-48 based dual temperature sensor
    1 people · 1 points · first shared 2022 · discussion on HN
  10. 10
    Remembering Nicam Part 1: Broadcast Equipment Teardown
    1 people · 1 points · first shared 2022 · discussion on HN
  11. 11
    Rovatools
    1 people · first shared 2021
  12. 12
    Common jst connector types
    1 people · first shared 2024
  13. 13
  14. 14
    8od
    1 people · first shared 2021

What HN people wrote when they linked it

Rediscover · 2024-12-14
Much great info about JST connectors, heck the whole website is great: https://www.mattmillman.com/info/crimpconnectors/common-jst-connector-…
alright2565 · 2024-06-24
I wouldn't recommend crimping your own hookup wires as a hobbiest, especially not dupont. The unofficial tools for dupont mostly all suck, and the official tools are $400+[1]. [1]: https://www.mattmillman.com/info/crimpconnectors/dupont-and-dupont-con… For my own crimping of dupont, I'm using the Iwiss SN-025 which works OK, but even then I've mostly switched to Mini-PV because I was tired of the dupont receptacles wearing out after 5 cycles. The pictured SN-28B is definitely not good for dupont, which has a totally round cable holding ring. Amazon/Aliexpress sellers don't know anything about what they are selling.
alanbernstein · 2023-07-26
One of the best connector resources I've found: https://www.mattmillman.com/info/crimpconnectors/
TOGoS · 2023-07-26
I will often spend hours researching different kinds of electrical connectors instead of....any other thing that I'm actually supposed to be doing. If I am feeling extra depressed I'll go order myself some Anderson PowerPole housings or maybe a kit of aviation connectors. Or read http://www.mattmillman.com/info/crimpconnectors/dupont-and-dupont-conn… yet again.
guerrilla · 2021-11-18
Not an EE but I know exactly what I'm going to use these for: Playing with old CPUs so that I can implement all the bus and decode logic and some peripherals in it. Something like this[1] but even simpler. They'll probably be used for similar but more realistic stuff, i.e. as reconfigurable glue. 1. http://www.mattmillman.com/projects/8od/
Kirr · 2021-03-23
These tiny connectors absolutely must be used with a proper crimper. http://www.mattmillman.com/info/crimpconnectors/dupont-and-dupont-conn…

Keyboard shortcuts

/Search
j kNext / previous blog
EnterOpen selected blog
vVisit the blog site
fFollow / unfollow
lSwitch grid / list view
dSwitch dark mode
g hHome
g pTop posts
g tTopics
g fFollowing
g lLiked
g yHistory
g qFAQ
EscBack / close